The CELLTRON™ Genstart Battery Tester provides generator/ fleet starting battery analysis to quickly identify the health of generator starting batteries. Ideal tester for NFPA compliance in lieu of specific gravity testing.
Assure that your battery is powered and ready to start a generator in the case of an outage.
Quickly test generator starting battery health and identify potential battery problems before they occur. The CELLTRON™ Genstart Battery Tester is capable of testing individual 12V batteries that are in series, parallel, or series/parallel configurations to verify the charge and state of health of the batteries compared to the battery rating.
Compatible with multiple pre-loaded battery types including Lead Acid, AGM Spiral, AGM Flat Plate, and Optima Redtop®.
Handles multiple battery rating systems including CCA, EN, SAE, JIS, DIN and IEC.
Battery rating entered by the user.
Record the battery temperature with the integrated infrared temperature sensor.
The present state of battery available capacity or remaining service life relative to rated capacity or specifications.
STATE OF CHARGE
The level of charge of the battery relative to its capacity presented as percentage points (0% = empty, 100% = full).
The CELLTRON™ Genstart Battery Tester kit includes a protective rubber boot, 10ft cable set with clamps, lead stud adapter set, thermal paper roll, 2GB SD memory card, and a carrying case.
INTEGRATED THERMAL PRINTER
On-the-spot results printing.
Integrated infrared temperature sensor with a range of -28 °C to +93 °C (-20 °F to +200 °F).
QUICK CONNECT CLAMPS
10 foot cable with heavy duty piranha clamps.
SD MEMORY CARD SLOT
Spring-loaded data card slot for test data storage and software upgrades.
Made of heavy duty rubber to effectively prevent damage and provides extra grip.
LEAD STUD ADAPTERS
Includes two male and two female adapters.
ONCE THE PRODUCT SHIPS, WE'RE JUST GETTING STARTED
The Franklin Electric Grid Solution Technical and Field Support Teams are here to assist with training, installation, and support. Our Field team will come to your site for training or installation supervision and our Support Center staff is available to assist with troubleshooting, warranty processing, and software installation support.
- Generator Starter Battery
- Automotive Battery
- 12 & 24 Volt Battery Pack
- Test each individual 12V battery that are in series, parallel, or series/parallel configurations
- Optima Redtop®
- Flooded Lead Acid
- AGM Spiral
- AGM Flat
Rating System / Range
Uses conductance based technology to display test results in the specified battery rating.
- CCA / 100 – 3000
- JIS / By JIS number
- DIN / 100 – 1000
- SAE / 100 – 3000
- IEC / 100 – 1000
- EN / 100 – 3000
- 128 x 64 pixel graphic, backlit display
- 10ft HD Dual Connector Kelvin Clamps
- Uses the power of the battery under test and 6AA internal batteries
- ABS plastic
|DC Voltage||0.9 - 32.0 Volts DC +/- 0.03VDC|
|Measured Temperature||-20 to 200°F 1.0%+/-5° (-28 to 93.3°C)|
|OperatingTemperature||32 to 120°F (0 to 49°C)|
|Dimensions||9.5in x 4in x 2.5in
(242mm x 102mm x 64mm)
|Weight||1 lb (427 g)|
|C089||2GB SD memory card|
|A095||6 pack thermal printer paper rolls|
|FEGRID-0222 CELLTRON Genstart Battery Tester Datasheet.pdf||4.22 MB|
|FEGRID-0045 Conductance Testing Brochure.pdf||1.76 MB|
|FEGRID-0014 Battery Monitoring Solutions Brochure.pdf||9.16 MB|
|FEGRID-0017 FE Grid Academy Certified Installer Training Brochure.pdf||13.13 MB|
|Celltron Genstart Instruction Manual.pdf||4.55 MB|